Reversomatic Secondary Lint Trap Door Replacement & Retrofit
A better solution for broken, leaking or difficult-to-clean secondary lint traps in condos.
If you live in a condominium with a Reversomatic secondary lint trap, you may already be familiar with the frustration of removing the original door, cleaning the lint screen and trying to get everything back into place.
Over time, these doors can become damaged, difficult to operate or fail to seal properly. In some cases, lint escapes around the edges of the door and blows into the laundry room.
Until recently, replacing a damaged secondary lint trap door could mean replacing the entire metal housing, potentially involving cutting open drywall and making costly repairs.
At Dryer Vent Cleaner, we now offer a practical alternative: a professional Reversomatic secondary lint trap door retrofit featuring a hinged replacement door, removable magnetic lint screen and perimeter sealing gasket.
Reversomatic Secondary Lint Trap Door Replacement Without Opening the Wall
Many Reversomatic secondary lint traps are recessed into the wall, making replacement of the complete metal box a complicated and potentially expensive job.
Fortunately, replacing the entire housing isn’t always necessary.
Our retrofit service allows us to retain the existing recessed secondary lint trap box and install a modern replacement door.
The new design features:
-
- Hinged access door: Opens easily for routine lint removal.
-
- Removable magnetic lint screen: Makes cleaning and maintenance much simpler.
-
- Foam perimeter gasket: Helps create a better seal around the door.
-
- Clean white metal finish: Provides a neat, professional appearance.
-
- Retrofit installation: Avoids unnecessary drywall removal and repairs.
How We Retrofit Existing Reversomatic Lint Traps
This isn’t simply a matter of removing one door and screwing on another.
Depending on the original Reversomatic design, the existing metal housing may have raised edges, spring-loaded mechanisms or internal brackets that prevent the new replacement door from sitting flush.
We carefully modify the existing metalwork where necessary, removing obstructing lips or brackets to create a suitable mounting surface.
The new hinged door is then fitted against the prepared opening, allowing its foam gasket to seal around the perimeter.
The result is an upgraded secondary lint trap without having to remove the original box from inside the wall.
Compatibility and the condition of the existing housing are checked before installation.
Is Your Reversomatic Secondary Lint Trap Blowing Lint Into the Room?
One of the problems we encounter with older Reversomatic secondary lint traps is lint escaping around poorly fitting doors.
When the dryer is running, air and lint can escape through gaps around the secondary lint trap door instead of remaining contained within the ductwork.
You might notice:
-
- Lint collecting on top of the dryer or washing machine.
-
- Dust and lint accumulating around the secondary lint trap.
-
- Lint escaping around the edges of the door.
-
- A door that no longer closes or seals properly.
-
- A damaged, missing or difficult-to-remove lint screen.
Our replacement door retrofit addresses gaps around the access door by providing a properly fitted perimeter gasket.
However, replacing the door is only part of the solution.
Why Dryer Vent Cleaning Is Just as Important
A poorly fitting secondary lint trap door may allow lint to escape, but restricted airflow elsewhere in the dryer vent system can make the situation worse.
Lint can accumulate inside the ductwork, at bends, around exterior vent covers and at roof terminations.
That’s why we recommend combining a Reversomatic secondary lint trap door retrofit with professional dryer vent cleaning.
During our service, we can inspect the accessible venting system, remove accumulated lint, check for restrictions and measure airflow.
A properly fitted secondary lint trap door combined with a clean, unrestricted dryer vent helps reduce lint escaping into the laundry room while improving dryer ventilation.
Secondary Lint Traps That Are Almost Impossible to Reach
Another problem we frequently encounter in condominiums is the location of the secondary lint trap.
Some are installed high above stacked washers and dryers, close to the ceiling or in awkward locations where homeowners struggle to reach them.
For younger, more mobile homeowners, this can be inconvenient.
For seniors or anyone with mobility or balance difficulties, it can be downright dangerous.
We’ve seen situations where residents have to balance on a step stool, lean over a washing machine and stretch upwards just to remove a stubborn secondary lint trap door.
And remember, this isn’t an occasional maintenance task. Secondary lint screens need regular cleaning, according to the equipment manufacturer’s instructions.
Nobody should have to perform a dangerous balancing act just to clean lint from their dryer ventilation system.
Our Solution: Secondary Lint Trap Relocation
When a secondary lint trap is installed in an exposed or accessible section of ductwork rather than recessed inside the wall, we may be able to offer a different solution.
Instead of struggling with the existing trap, we can assess whether the dryer vent ductwork can be rerouted to a more convenient location.
We can then install a suitable, easier-to-use secondary lint trap where the homeowner can safely access and clean it.
Depending on the installation, this may involve:
-
- Modifying or rerouting the existing dryer vent ductwork.
-
- Removing the old secondary lint trap.
-
- Installing a suitable replacement with easier access.
-
- Positioning the new trap at a practical height.
-
- Checking duct connections and airflow after the modifications.
Any replacement or relocation must be compatible with the dryer, applicable installation instructions and local code requirements. Secondary lint traps are not appropriate for every dryer vent system.
Making Dryer Vent Maintenance Easier for Seniors
For older condo residents, relocating a difficult-to-reach secondary lint trap can make a significant difference.
Instead of climbing onto a stool or reaching awkwardly over appliances, the homeowner can access the lint screen from a safer, more comfortable position.
It’s a relatively simple concept, but one that can make routine dryer maintenance much easier.
Which Secondary Lint Trap Solution Do You Need?
Recessed Reversomatic Secondary Lint Trap
If your Reversomatic secondary lint trap is built into the wall and the original door is damaged, leaking lint or difficult to operate, our replacement door retrofit may be the ideal solution.
We retain the existing metal housing and fit a new hinged door with a removable magnetic screen.
Exposed or Difficult-to-Reach Secondary Lint Trap
If your secondary lint trap is mounted high above the dryer or in an awkward location, we can assess whether rerouting the ductwork and installing a more accessible replacement is possible.
The best solution depends on your existing installation.
Professional Secondary Lint Trap Repairs and Dryer Vent Cleaning
At Dryer Vent Cleaner, we’ve been cleaning, repairing and improving residential dryer vent systems since 2011.
We regularly work in condominiums, townhouses and residential properties throughout Burlington, Oakville, Hamilton, Stoney Creek, Grimsby, St. Catharines and surrounding communities.
Our services include:
- Reversomatic secondary lint trap door replacement and retrofitting.
- Secondary lint trap relocation and replacement.
- Professional dryer vent cleaning.
- Roof dryer vent cleaning.
- Rectifying LG D80 errors.
- Dryer vent airflow testing.
- Dryer vent ductwork repairs and improvements.
We believe in finding practical solutions rather than recommending unnecessary replacements.
Need Your Reversomatic Secondary Lint Trap Repaired?
Whether your existing Reversomatic door is broken, lint is escaping into your laundry room or your secondary lint trap is simply too difficult to reach, we may be able to help.
Contact Dryer Vent Cleaner to discuss your secondary lint trap and arrange an assessment.
In many cases, a professional retrofit can solve the problem without the expense and disruption of replacing the entire recessed housing.
Dryer Vent Cleaner — Repair, Don’t Replace!







